pid tuning with fixes
[ros_wild_thumper.git] / scripts /
2016-07-16 Erik Andresenpid tuning with fixes
2016-07-16 Erik Andresenpid fixes
2016-07-13 Erik Andresenmotor_ctrl: pid tuning data and added helper script
2016-07-13 Erik Andresenmotor_ctrl: pid tuning
2016-05-01 Erik AndresenRevert "wt_node: Transision from 4x TLE5205 to 2x VNH2SP30"
2016-04-18 Erik Andresenwt_node: Transision from 4x TLE5205 to 2x VNH2SP30
2016-03-31 Erik Andresenaddded script to get motor step response
2016-03-31 Erik Andresenmotor_ctrl: pid tuning
2015-12-28 Erik Andresenwait 3s for ros to register and establish all subscribe...
2015-12-23 Erik Andresenwt_node: no asynci2c access on cmd_vel
2015-12-18 Erik Andresenminor fixes
2015-12-06 Erik Andresenadded rgb stripes
2015-10-15 Erik Andresensonar sensors: set fov to 40° as stated in picaxe.hobbi...
2015-10-12 Erik Andresenekf: gps fixes
2015-10-11 Erik Andresen-navigation stack fixes
2015-09-27 Erik Andresenenabled range sensor layer
2015-09-24 Erik Andresenumbmark correction
2015-09-22 Erik Andresenavr: calibration from umbmark
2015-09-06 Erik Andresenadded umbmark.py, tested with simulation
2015-09-03 Erik Andresensimulation/gazebo: added controller for imu, range...
2015-07-19 Erik Andresenadded waypoint script
2015-07-11 Erik AndresenMerge branch 'master' of ssh://vontaene/home/erik_alt...
2015-07-11 Erik Andresenrenamed move_base.py to wt_node.py
2015-07-10 Erik Andresenmove_base: calib ir sensors
2015-07-10 Erik Andresenadded range sensor messages
2015-08-14 Erik Andresenodometry tuning
2015-08-14 Erik Andresenadded robot_pose_ekf
2015-06-13 Erik Andresenadded 3dsensor
2015-06-05 Erik AndresenMerge branch 'master' of ssh://vontaene/home/erik_alt...
2015-06-05 Erik Andresenmove_base: use imu to control motor handicap
2015-08-14 Erik AndresenMerge branch 'master' of ssh://vontaene/home/erik_alt...
2015-08-14 Erik Andresenmove_base: added voltage measurement
2015-08-14 Erik Andresenadded diagnostic msg
2015-08-14 Erik Andresenmove_base: updated to new speed control, added odom...
2015-08-14 Erik Andresenadded test_speed script
2015-08-14 Erik Andresenupdated to motor controller
2015-05-15 Erik Andreseninitial hpec sav based path following
2015-05-07 Erik Andresenmove_base: support for srf & ir
2015-04-05 Erik Andresentuning
2015-04-04 Erik Andresenadded teleop, move_base for cmd_vel