from geometry_msgs.msg import Twist
from nav_msgs.msg import Odometry
from diagnostic_msgs.msg import DiagnosticArray, DiagnosticStatus, KeyValue
+from dynamic_reconfigure.server import Server
from sensor_msgs.msg import Imu, Range
from wild_thumper.msg import LedStripe
-from dynamic_reconfigure.server import Server
from wild_thumper.cfg import WildThumperConfig
WHEEL_DIST = 0.248
self.update()
def set(self, i, red=0, green=0, blue=0):
- if red > 127 or green > 127 or blue >> 127 or red < 0 or green < 0 or blue < 0:
+ if red > 127 or green > 127 or blue > 127 or red < 0 or green < 0 or blue < 0:
raise Exception("Bad RGB Value")
self.l[i] = (red, green, blue)
self.dyn_conf = Server(WildThumperConfig, self.execute_dyn_reconf)
self.pub_odom = rospy.Publisher("odom", Odometry, queue_size=16)
self.pub_diag = rospy.Publisher("diagnostics", DiagnosticArray, queue_size=16)
- self.pub_range_fwd = rospy.Publisher("range_forward", Range, queue_size=16)
+ self.pub_range_fwd_left = rospy.Publisher("range_forward_left", Range, queue_size=16)
+ self.pub_range_fwd_right = rospy.Publisher("range_forward_right", Range, queue_size=16)
self.pub_range_bwd = rospy.Publisher("range_backward", Range, queue_size=16)
self.pub_range_left = rospy.Publisher("range_left", Range, queue_size=16)
self.pub_range_right = rospy.Publisher("range_right", Range, queue_size=16)
self.cmd_vel = None
+ self.cur_vel = (0, 0)
+ self.bMotorManual = False
self.set_speed(0, 0)
rospy.loginfo("Init done")
i2c_write_reg(0x50, 0x90, struct.pack("BB", 1, 1)) # switch direction
- self.handicap_last = (-1, -1)
self.pStripe = LPD8806(1, 0, 12)
rospy.Subscriber("cmd_vel_out", Twist, self.cmdVelReceived)
rospy.Subscriber("led_stripe", LedStripe, self.led_stripe_received)
sleep(3) # wait 3s for ros to register and establish all subscriber connections before sending reset diag
reset_val = self.get_reset()
rospy.loginfo("Reset Status: 0x%x" % reset_val)
- i = 0
+ ir_count = 0
+ sonar_count = 0
while not rospy.is_shutdown():
rospy.logdebug("Loop alive")
#print struct.unpack(">B", i2c_read_reg(0x50, 0xA2, 1))[0] # count test
self.get_motor_err()
self.get_odom()
self.get_voltage()
- if i % 2:
- self.get_dist_forward()
+
+ if ir_count == 0:
self.get_dist_left()
+ ir_count+=1
else:
- self.get_dist_backward()
self.get_dist_right()
- i+=1
+ ir_count=0
+
+ if sonar_count == 0:
+ self.get_dist_forward_left()
+ self.update_dist_backward()
+ sonar_count+=1
+ elif sonar_count == 1:
+ self.get_dist_backward()
+ self.update_dist_forward_right()
+ sonar_count+=1
+ elif sonar_count == 2:
+ self.get_dist_forward_right()
+ self.update_dist_forward_left()
+ sonar_count=0
+
if self.cmd_vel != None:
self.set_speed(self.cmd_vel[0], self.cmd_vel[1])
+ self.cur_vel = self.cmd_vel
self.cmd_vel = None
rate.sleep()
self.range_sensor_max = config["range_sensor_max"]
self.odom_covar_xy = config["odom_covar_xy"]
self.odom_covar_angle = config["odom_covar_angle"]
- self.pitch_handicap_enable = config["pitch_handicap_enable"]
- self.pitch_handicap_limit = config["pitch_handicap_limit"]
- self.pitch_handicap_strength = config["pitch_handicap_strength"]
-
- if not self.pitch_handicap_enable:
- self.set_motor_handicap(0, 0)
+ self.rollover_protect = config["rollover_protect"]
+ self.rollover_protect_limit = config["rollover_protect_limit"]
+ self.rollover_protect_pwm = config["rollover_protect_pwm"]
return config
- def set_motor_handicap(self, front, aft): # percent
- if front > 100: front = 100
- if aft > 100: aft = 100
- if self.handicap_last != (front, aft):
- i2c_write_reg(0x50, 0x94, struct.pack(">bb", front, aft))
- self.handicap_last = (front, aft)
-
def imuReceived(self, msg):
- if self.pitch_handicap_enable:
+ if self.rollover_protect and any(self.cur_vel):
(roll, pitch, yaw) = tf.transformations.euler_from_quaternion(msg.orientation.__getstate__())
- if pitch > self.pitch_handicap_limit*pi/180:
- val = (100.0/self.pitch_handicap_strength)*abs(pitch)*180/pi
- self.set_motor_handicap(int(val), 0)
- elif pitch < -self.pitch_handicap_limit*pi/180:
- val = (100.0/self.pitch_handicap_strength)*abs(pitch)*180/pi
- self.set_motor_handicap(0, int(val))
- else:
- self.set_motor_handicap(0, 0)
+ if pitch > self.rollover_protect_limit*pi/180:
+ self.bMotorManual = True
+ i2c_write_reg(0x50, 0x1, struct.pack(">hhhh", 0, self.rollover_protect_pwm, 0, self.rollover_protect_pwm))
+ rospy.logwarn("Running forward rollver protection")
+ elif pitch < -self.rollover_protect_limit*pi/180:
+ self.bMotorManual = True
+ i2c_write_reg(0x50, 0x1, struct.pack(">hhhh", -self.rollover_protect_pwm, 0, -self.rollover_protect_pwm, 0))
+ rospy.logwarn("Running backward rollver protection")
+ elif self.bMotorManual:
+ i2c_write_reg(0x50, 0x1, struct.pack(">hhhh", 0, 0, 0, 0))
+ self.bMotorManual = False
+ self.cmd_vel = (0, 0)
+ rospy.logwarn("Rollver protection done")
def get_reset(self):
reset = struct.unpack(">B", i2c_read_reg(0x50, 0xA0, 1))[0]
odom.pose.pose.orientation.w = odom_quat[3]
odom.pose.covariance[0] = self.odom_covar_xy # x
odom.pose.covariance[7] = self.odom_covar_xy # y
- odom.pose.covariance[14] = 99999 # z
- odom.pose.covariance[21] = 99999 # rotation about X axis
- odom.pose.covariance[28] = 99999 # rotation about Y axis
+ odom.pose.covariance[14] = self.odom_covar_xy # z
+ odom.pose.covariance[21] = self.odom_covar_angle # rotation about X axis
+ odom.pose.covariance[28] = self.odom_covar_angle # rotation about Y axis
odom.pose.covariance[35] = self.odom_covar_angle # rotation about Z axis
# set the velocity
i2c_write_reg(0x50, 0x50, struct.pack(">ff", trans, rot))
def cmdVelReceived(self, msg):
- rospy.logdebug("Set new cmd_vel:", msg.linear.x, msg.angular.z)
- self.cmd_vel = (msg.linear.x, msg.angular.z) # commit speed on next update cycle
- rospy.logdebug("Set new cmd_vel done")
+ if not self.bMotorManual:
+ rospy.logdebug("Set new cmd_vel: %.2f %.2f", msg.linear.x, msg.angular.z)
+ self.cmd_vel = (msg.linear.x, msg.angular.z) # commit speed on next update cycle
+ rospy.logdebug("Set new cmd_vel done")
# http://rn-wissen.de/wiki/index.php/Sensorarten#Sharp_GP2D12
def get_dist_ir(self, num):
if dist > 69:
self.send_range(self.pub_range_right, "ir_right", Range.INFRARED, 17.4/(dist - 69), 0.04, 0.3, 1)
- def get_dist_forward(self):
- if self.pub_range_fwd.get_num_connections() > 0:
+ def get_dist_forward_left(self):
+ if self.pub_range_fwd_left.get_num_connections() > 0:
dist = self.read_dist_srf(0x15)
- self.send_range(self.pub_range_fwd, "sonar_forward", Range.ULTRASOUND, dist, 0.04, self.range_sensor_max, 30)
- self.start_dist_srf(0x5) # get next value
+ self.send_range(self.pub_range_fwd_left, "sonar_forward_left", Range.ULTRASOUND, dist, 0.04, self.range_sensor_max, 30)
+
+ def update_dist_forward_left(self):
+ if self.pub_range_fwd_left.get_num_connections() > 0:
+ self.start_dist_srf(0x5)
def get_dist_backward(self):
if self.pub_range_bwd.get_num_connections() > 0:
dist = self.read_dist_srf(0x17)
self.send_range(self.pub_range_bwd, "sonar_backward", Range.ULTRASOUND, dist, 0.04, self.range_sensor_max, 30)
- self.start_dist_srf(0x7) # get next value
+
+ def update_dist_backward(self):
+ if self.pub_range_bwd.get_num_connections() > 0:
+ self.start_dist_srf(0x7)
+
+ def get_dist_forward_right(self):
+ if self.pub_range_fwd_right.get_num_connections() > 0:
+ dist = self.read_dist_srf(0x19)
+ self.send_range(self.pub_range_fwd_right, "sonar_forward_right", Range.ULTRASOUND, dist, 0.04, self.range_sensor_max, 30)
+
+ def update_dist_forward_right(self):
+ if self.pub_range_fwd_right.get_num_connections() > 0:
+ self.start_dist_srf(0xb)
def led_stripe_received(self, msg):
for led in msg.leds:
projects / ros_wild_thumper.git / blobdiff