avr/nano: add third srf05

[ros_wild_thumper.git] / avr / nano / main.c

diff --git a/avr/nano/main.c b/avr/nano/main.c
index 0cb0acfba471aaaf79d67feba98932da429af36c..5ba30821e26227f6e936fede523b2d80b3dd4964 100644 (file)
--- a/avr/nano/main.c
+++ b/avr/nano/main.c
@@ -4,6 +4,7 @@
 #include <avr/io.h>
 #include <avr/interrupt.h>
 #include <avr/sleep.h>
 #include <avr/io.h>
 #include <avr/interrupt.h>
 #include <avr/sleep.h>

+#include <util/delay.h>

 #include "uart.h"
 
 /*
 #include "uart.h"
 
 /*


@@ -13,6 +14,21 @@
  * 0x02 Distance left LSB
  * 0x03 Distance right MSB
  * 0x04 Distance right LSB
  * 0x02 Distance left LSB
  * 0x03 Distance right MSB
  * 0x04 Distance right LSB

+ * 0x05 Distance forward1 MSB
+ * 0x06 Distance forward1 LSB
+ * 0x07 Distance backward MSB
+ * 0x08 Distance backward LSB
+ * 0x09 Voltage MSB
+ * 0x0A Voltage LSB
+ * 0x0B Distance forward2 MSB
+ * 0x0C Distance forward2 LSB
+ *
+ * 0x15 Distance forward1 MSB (read only)
+ * 0x16 Distance forward1 LSB (read only)
+ * 0x17 Distance backward MSB (read only)
+ * 0x18 Distance backward LSB (read only)
+ * 0x19 Distance forward2 MSB (read only)
+ * 0x1A Distance forward2 LSB (read only)

  *
  * 0xff Bootloader
  */
  *
  * 0xff Bootloader
  */


@@ -26,6 +42,14 @@ static volatile uint8_t ireg=0;
 static volatile uint8_t bootloader=0;
 static volatile uint16_t dist_left=0;
 static volatile uint16_t dist_right=0;
 static volatile uint8_t bootloader=0;
 static volatile uint16_t dist_left=0;
 static volatile uint16_t dist_right=0;

+static volatile uint16_t dist_forward1=0;
+static volatile uint16_t dist_forward2=0;
+static volatile uint16_t dist_backward=0;
+static volatile uint8_t start_dist_fwd1=0;
+static volatile uint8_t start_dist_fwd2=0;
+static volatile uint8_t start_dist_bwd=0;
+static volatile uint16_t voltage=0;
+static volatile uint8_t pind_pre=0;

 
 ISR(TWI_vect)
 {
 
 ISR(TWI_vect)
 {


@@ -41,6 +65,11 @@ ISR(TWI_vect)
                        switch(ireg) {
                                case 0x00: // register select
                                        ireg = TWDR;
                        switch(ireg) {
                                case 0x00: // register select
                                        ireg = TWDR;

+
+                                       if (ireg == 0x05) start_dist_fwd1=1;
+                                       if (ireg == 0x07) start_dist_bwd=1;
+                                       if (ireg == 0x09) start_dist_fwd2=1;
+

                                        ireg--; // because we do ireg++ below
                                        TWI_ACK;
                                        break;
                                        ireg--; // because we do ireg++ below
                                        TWI_ACK;
                                        break;


@@ -72,6 +101,69 @@ ISR(TWI_vect)
                                        TWDR = tmp16;
                                        TWI_ACK;
                                        break;
                                        TWDR = tmp16;
                                        TWI_ACK;
                                        break;

+                               case 0x05: // Distance forward1 MSB
+                                       tmp16 = dist_forward1;
+                                       TWDR = tmp16>>8;
+                                       TWI_ACK;
+                                       break;
+                               case 0x06: // Distance forward1 LSB
+                                       TWDR = tmp16;
+                                       TWI_ACK;
+                                       break;
+                               case 0x07: // Distance backward MSB
+                                       tmp16 = dist_backward;
+                                       TWDR = tmp16>>8;
+                                       TWI_ACK;
+                                       break;
+                               case 0x08: // Distance backward LSB
+                                       TWDR = tmp16;
+                                       TWI_ACK;
+                                       break;
+                               case 0x09: // Voltage MSB
+                                       tmp16 = voltage;
+                                       TWDR = tmp16>>8;
+                                       TWI_ACK;
+                                       break;
+                               case 0x0A: // Voltage LSB
+                                       TWDR = tmp16;
+                                       TWI_ACK;
+                                       break;
+                               case 0x0B: // Distance forward2 MSB
+                                       tmp16 = dist_forward2;
+                                       TWDR = tmp16>>8;
+                                       TWI_ACK;
+                                       break;
+                               case 0x0C: // Distance forward2 LSB
+                                       TWDR = tmp16;
+                                       TWI_ACK;
+                                       break;
+                               case 0x15: // Distance forward1 MSB
+                                       tmp16 = dist_forward1;
+                                       TWDR = tmp16>>8;
+                                       TWI_ACK;
+                                       break;
+                               case 0x16: // Distance forward1 LSB
+                                       TWDR = tmp16;
+                                       TWI_ACK;
+                                       break;
+                               case 0x17: // Distance backward MSB
+                                       tmp16 = dist_backward;
+                                       TWDR = tmp16>>8;
+                                       TWI_ACK;
+                                       break;
+                               case 0x18: // Distance backward LSB
+                                       TWDR = tmp16;
+                                       TWI_ACK;
+                                       break;
+                               case 0x19: // Distance forward2 MSB
+                                       tmp16 = dist_forward2;
+                                       TWDR = tmp16>>8;
+                                       TWI_ACK;
+                                       break;
+                               case 0x1A: // Distance forward2 LSB
+                                       TWDR = tmp16;
+                                       TWI_ACK;
+                                       break;

                                default:
                                        TWDR = 0;
                                        TWI_NAK;
                                default:
                                        TWDR = 0;
                                        TWI_NAK;


@@ -92,7 +184,7 @@ uint16_t ReadChannel(uint8_t mux) {
        // setzen auf 8 (1) und ADC aktivieren (1)
 
        ADMUX = mux;                      // Kanal waehlen
        // setzen auf 8 (1) und ADC aktivieren (1)
 
        ADMUX = mux;                      // Kanal waehlen

-       ADMUX |= (1<<REFS1) | (1<<REFS0); // interne Referenzspannung nutzen 
+       ADMUX |= (1<<REFS0);

 
        /* nach Aktivieren des ADC wird ein "Dummy-Readout" empfohlen, man liest
           also einen Wert und verwirft diesen, um den ADC "warmlaufen zu lassen" */
 
        /* nach Aktivieren des ADC wird ein "Dummy-Readout" empfohlen, man liest
           also einen Wert und verwirft diesen, um den ADC "warmlaufen zu lassen" */


@@ -128,6 +220,68 @@ static unsigned short get_distance(uint8_t i) {
 }
 
 
 }
 
 

+static unsigned short get_voltage(void) {
+       return ReadChannel(2)*1.46;
+}
+
+
+ISR(INT0_vect) {
+       static uint16_t t_start=0;
+       uint16_t t_now = TCNT1;
+       uint16_t t_diff;
+
+       if (bit_is_set(PIND, 2)) { // high level
+               // start timer
+               t_start = t_now;
+       } else {
+               t_diff = t_now - t_start;
+               dist_forward1 = t_diff*2.7586 + 0.5; // t [µs] / 580 = mm
+               // disable this interrupt
+               EIMSK &= ~(1 << INT0);
+       }
+}
+
+
+ISR(INT1_vect) {
+       static uint16_t t_start=0;
+       uint16_t t_now = TCNT1;
+       uint16_t t_diff;
+
+       if (bit_is_set(PIND, 3)) { // high level
+               // start timer
+               t_start = t_now;
+       } else {
+               t_diff = t_now - t_start;
+               dist_backward = t_diff*2.7586 + 0.5; // t [µs] / 580 = mm
+               // disable this interrupt
+               EIMSK &= ~(1 << INT1);
+       }
+}
+
+
+ISR(PCINT2_vect) {
+       uint8_t pind_cur = PIND;
+
+       if ((pind_cur ^ pind_pre) & (1<<4)) { // PCINT20
+               static uint16_t t_start=0;
+               uint16_t t_now = TCNT1;
+               uint16_t t_diff;
+
+               if (bit_is_set(pind_cur, 4)) { // high level
+                       // start timer
+                       t_start = t_now;
+               } else {
+                       t_diff = t_now - t_start;
+                       dist_forward2 = t_diff*2.7586 + 0.5; // t [µs] / 580 = mm
+                       // disable this interrupt
+                       PCMSK2 &= ~(1 << PCINT20);
+               }
+       }
+
+       pind_pre = pind_cur;
+}
+
+

 int main(void) {
        bootloader = 0x00;
        setup_uart(9600);
 int main(void) {
        bootloader = 0x00;
        setup_uart(9600);


@@ -137,18 +291,29 @@ int main(void) {
        TWAR = 0x52;
        TWI_RESET;
 
        TWAR = 0x52;
        TWI_RESET;
 

+       // Timer 1: Normal mode, Top: 0xffff, Prescaler: F_CPU/256=62500Hz
+       TCCR1A = 0x0;
+       TCCR1B = (1 << CS12);
+
+       // External Interrupts
+       EICRA = (1 << ISC10) | (1 << ISC00);
+       PCICR = (1 << PCIE2);
+

        printf("\r\nStart\r\n");
 
        set_sleep_mode(SLEEP_MODE_IDLE);
        sei();
        while(1) {
                switch(ireg) {
        printf("\r\nStart\r\n");
 
        set_sleep_mode(SLEEP_MODE_IDLE);
        sei();
        while(1) {
                switch(ireg) {

-                       case 1: // ir left
+                       case 0x01: // ir left

                                dist_left = get_distance(0);
                                break;
                                dist_left = get_distance(0);
                                break;

-                       case 3: // ir right
+                       case 0x03: // ir right

                                dist_right = get_distance(1);
                                break;
                                dist_right = get_distance(1);
                                break;

+                       case 0x09: // voltage
+                               voltage = get_voltage();
+                               break;

                        case 0xff: // Magic reg that starts the bootloader
                                if (bootloader == 0xa5) {
                                        cli();
                        case 0xff: // Magic reg that starts the bootloader
                                if (bootloader == 0xa5) {
                                        cli();


@@ -160,6 +325,47 @@ int main(void) {
                                break;
                }
 
                                break;
                }
 

+               if (start_dist_fwd1) {
+                       start_dist_fwd1 = 0;
+                       dist_forward1 = 0;
+
+                       DDRD |= (1 << 2);
+                       PORTD |= (1 << 2);
+                       _delay_us(10);
+                       PORTD &= ~(1 << 2);
+                       DDRD &= ~(1 << 2);
+                       // wait for interrupt
+                       EIFR &= (1 << INTF0); // clear old interrupt before enabling
+                       EIMSK |= (1 << INT0);
+               }
+               if (start_dist_bwd) {
+                       start_dist_bwd = 0;
+                       dist_backward = 0;
+
+                       DDRD |= (1 << 3);
+                       PORTD |= (1 << 3);
+                       _delay_us(10);
+                       PORTD &= ~(1 << 3);
+                       DDRD &= ~(1 << 3);
+                       // wait for interrupt
+                       EIFR &= (1 << INTF1); // clear old interrupt before enabling
+                       EIMSK |= (1 << INT1);
+               }
+               if (start_dist_fwd2) {
+                       start_dist_fwd2 = 0;
+                       dist_forward2 = 0;
+
+                       // PD4 = PCINT20
+                       DDRD |= (1 << 4);
+                       PORTD |= (1 << 4);
+                       _delay_us(10);
+                       PORTD &= ~(1 << 4);
+                       DDRD &= ~(1 << 4);
+                       // wait for interrupt
+                       pind_pre = PIND;
+                       PCMSK2 |= (1 << PCINT20);
+               }
+

                sleep_mode();
        }
 
                sleep_mode();
        }