X-Git-Url: https://defiant.homedns.org/gitweb/?p=ros_wild_thumper.git;a=blobdiff_plain;f=scripts%2Fwt_node.py;h=a5978b032850342b1a0e3ad04e03f72a408ba584;hp=2672fed1d2bc636bb4ca3b7f40bed22e3e2f0b54;hb=dc43ace40c91efd3f0ed892898d5e1d62c2f2fd9;hpb=9349f21c7fb8f1629fe4154cc054fc894a9e600d diff --git a/scripts/wt_node.py b/scripts/wt_node.py index 2672fed..a5978b0 100755 --- a/scripts/wt_node.py +++ b/scripts/wt_node.py @@ -61,6 +61,7 @@ class MoveBase: self.pub_range_bwd = rospy.Publisher("range_backward", Range, queue_size=16) self.pub_range_left = rospy.Publisher("range_left", Range, queue_size=16) self.pub_range_right = rospy.Publisher("range_right", Range, queue_size=16) + self.cmd_vel = None self.set_speed(0, 0) rospy.loginfo("Init done") i2c_write_reg(0x50, 0x90, struct.pack("BB", 1, 1)) # switch direction @@ -73,6 +74,7 @@ class MoveBase: def run(self): rate = rospy.Rate(20.0) + sleep(3) # wait 3s for ros to register and establish all subscriber connections before sending reset diag reset_val = self.get_reset() rospy.loginfo("Reset Status: 0x%x" % reset_val) i = 0 @@ -88,9 +90,14 @@ class MoveBase: self.get_dist_backward() self.get_dist_right() i+=1 + if self.cmd_vel != None: + self.set_speed(self.cmd_vel[0], self.cmd_vel[1]) + self.cmd_vel = None rate.sleep() def set_motor_handicap(self, front, aft): # percent + if front > 100: front = 100 + if aft > 100: aft = 100 if self.handicap_last != (front, aft): i2c_write_reg(0x50, 0x94, struct.pack(">bb", front, aft)) self.handicap_last = (front, aft) @@ -98,10 +105,10 @@ class MoveBase: def imuReceived(self, msg): (roll, pitch, yaw) = tf.transformations.euler_from_quaternion(msg.orientation.__getstate__()) if pitch > 30*pi/180: - val = (100.0/65)*abs(pitch)*180/pi + val = (100.0/60)*abs(pitch)*180/pi self.set_motor_handicap(int(val), 0) elif pitch < -30*pi/180: - val = (100.0/65)*abs(pitch)*180/pi + val = (100.0/60)*abs(pitch)*180/pi self.set_motor_handicap(0, int(val)) else: self.set_motor_handicap(0, 0) @@ -167,8 +174,7 @@ class MoveBase: def get_odom(self): - posx, posy, angle = struct.unpack(">fff", i2c_read_reg(0x50, 0x40, 12)) - speed_trans, speed_rot = struct.unpack(">ff", i2c_read_reg(0x50, 0x38, 8)) + speed_trans, speed_rot, posx, posy, angle = struct.unpack(">fffff", i2c_read_reg(0x50, 0x38, 20)) current_time = rospy.Time.now() # since all odometry is 6DOF we'll need a quaternion created from yaw @@ -218,9 +224,7 @@ class MoveBase: i2c_write_reg(0x50, 0x50, struct.pack(">ff", trans, rot)) def cmdVelReceived(self, msg): - trans = msg.linear.x - rot = msg.angular.z # rad/s - self.set_speed(trans, rot) + self.cmd_vel = (msg.linear.x, msg.angular.z) # commit speed on next update cycle # http://rn-wissen.de/wiki/index.php/Sensorarten#Sharp_GP2D12 def get_dist_ir(self, num):