X-Git-Url: https://defiant.homedns.org/gitweb/?p=ros_wild_thumper.git;a=blobdiff_plain;f=launch%2Frobot_localization.launch;h=a6e408dfaf8144cd14b4346c218b81fa805457f9;hp=683c02108c786d76c4476dfae03686b70adb539c;hb=2ee98f31c1f2527cdb4e190e37d9f6ad9e246859;hpb=3c4bb7f988be07a6dd592c80541e73135536a96c

diff --git a/launch/robot_localization.launch b/launch/robot_localization.launch
index 683c021..a6e408d 100644
--- a/launch/robot_localization.launch
+++ b/launch/robot_localization.launch
@@ -78,7 +78,7 @@
 		   making this parameter required for each sensor. -->
 		<rosparam param="odom0_config">[true, true, false, false, false, true, true, true, false, false, false, true, true, true, false]</rosparam>
 		<rosparam param="imu0_config">[false, false, false, true, true, true, false, false, false, true, true, true, true, true, true]</rosparam>
-		<rosparam param="odom1_config">[true, true, true, false, false, false, true, true, true, false, false, false, true, true, true]</rosparam>
+		<rosparam param="odom1_config">[true, true, true, false, false, false, false, false, false, false, false, false, false, false, false]</rosparam>
 
 
 		<!-- The best practice for including new sensors in robot_localization's state estimation nodes is to pass in velocity
@@ -99,7 +99,7 @@
 		   variables have at least one source of absolute measurement. -->
 		<param name="odom0_differential" value="true"/>
 		<param name="imu0_differential" value="false"/>
-		<param name="odom1_differential" value="true"/>
+		<param name="odom1_differential" value="false"/>
 
 		<!-- When the node starts, if this parameter is true, then the first measurement is treated as a "zero point" for all
 		   future measurements. While you can achieve the same effect with the differential paremeter, the key difference is
@@ -107,7 +107,7 @@
 		   you simply want your measurements to start at 0 for a given sensor, set this to true. -->
 		<param name="odom0_relative" value="false"/>
 		<param name="imu0_relative" value="false"/>
-		<param name="odom1_relative" value="false"/>
+		<param name="odom1_relative" value="true"/>
 
 		<!-- If we're including accelerations in our state estimate, then we'll probably want to remove any acceleration that
 		   is due to gravity for each IMU. If you don't want to, then set this to false. Defaults to false if unspecified. -->