X-Git-Url: https://defiant.homedns.org/gitweb/?p=ros_wild_thumper.git;a=blobdiff_plain;f=avr%2Fmotor_ctrl%2Fmain.c;h=3642d4a8b222e59530eaafb28cb8a287f3dcd4da;hp=a9565871f0058d7f2585f28ea5f2ca64b55694ca;hb=d1683df60f044ecabcda11f24c835122a8cf20e4;hpb=a5fb41902fd2065d475f1b2f618c6428a44f6cd7

diff --git a/avr/motor_ctrl/main.c b/avr/motor_ctrl/main.c
index a956587..3642d4a 100644
--- a/avr/motor_ctrl/main.c
+++ b/avr/motor_ctrl/main.c
@@ -5,6 +5,9 @@
 #include <avr/io.h>
 #include <avr/interrupt.h>
 #include <avr/sleep.h>
+#include <util/twi.h>
+#include <avr/eeprom.h>
+#include <avr/wdt.h>
 #include "uart.h"
 
 /*
@@ -97,22 +100,23 @@
  */
 
 
-#define KP 0.061
+#define KP 0.062
 #define KI 0.12
 #define KD 0.0
 #define PID_T 0.01
 // wheel diameter=12cm, encoder=48cpr, gear ratio=1:47
 // STEP_PER_M = 48*47/(d*pi)
 // Left real diameter: 0.12808, Right real diameter: 0.121
-#define STEP_PER_M 5770.8
+#define STEP_PER_M 5573.0
 #define STEP_PER_M_LEFT (STEP_PER_M)
 #define STEP_PER_M_RIGHT (STEP_PER_M)
 #define WHEEL_DIST 0.39912 // Measured: 0.252
 #define PWM_BREAK INT16_MIN
+#define STALL_LIMIT 140000
 
-#define TWI_ACK   TWCR = (1<<TWEA) | (1<<TWINT) | (1<<TWEN) | (1<<TWIE)
-#define TWI_RESET TWCR &= ~((1 << TWSTO) | (1 << TWEN)); TWI_ACK
+#define TWI_ACK   TWCR = (1<<TWINT) | (1<<TWEA) | (1<<TWEN) | (1<<TWIE)
 #define TWI_NAK   TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWIE)
+#define TWI_RESET TWCR = (1<<TWINT) | (1<<TWEA) | (1<<TWSTO) | (1<<TWEN) | (1<<TWIE);
 #define ENABLE_PWM_MOTOR1  TCCR1A |=  (1 << COM1A1)
 #define ENABLE_PWM_MOTOR2  TCCR1A |=  (1 << COM1B1)
 #define ENABLE_PWM_MOTOR3  TCCR2  |=  (1 << COM21);
@@ -187,13 +191,13 @@ ISR(TWI_vect)
 	static ufloat_t tmp_speed;
 	static ufloat_t tmp_angle;
 
-	switch (TWSR & 0xF8)
+	switch(TW_STATUS)
 	{
-		case 0x60: // start write
+		case TW_SR_SLA_ACK: // start write
 			TWI_ACK;
 			ireg = 0;
 			break;
-		case 0x80: // write
+		case TW_SR_DATA_ACK: // write
 			switch(ireg) {
 				case 0x00: // register select
 					ireg = TWDR;
@@ -380,8 +384,8 @@ ISR(TWI_vect)
 			}
 			ireg++;
 			break;
-		case 0xA8: // start read
-		case 0xB8: // read
+		case TW_ST_SLA_ACK: // start read
+		case TW_ST_DATA_ACK: // read
 			switch(ireg) {
 				case 0x02: // Motor 1 PWM
 					TWDR = OCR1A;
@@ -615,6 +619,9 @@ ISR(TWI_vect)
 			}
 			ireg++;
 			break;
+		case TW_SR_STOP:
+			TWI_ACK;
+			break;
 		default:
 			TWI_RESET;
 	}
@@ -899,25 +906,25 @@ static void update_pid(void) {
 	static int32_t esum4=0;
 
 	// protect motors from damage if stalling
-	if (labs(esum1) > 140000 && speed1 == 0) {
+	if (labs(esum1) > STALL_LIMIT && speed1 == 0) {
 		motor1 = 0;
 		motor1_mode = MOTOR_MANUAL;
 		error_state |= (1<<4);
 		esum1 = 0;
 	}	
-	if (labs(esum2) > 140000 && speed2 == 0) {
+	if (labs(esum2) > STALL_LIMIT && speed2 == 0) {
 		motor2 = 0;
 		motor2_mode = MOTOR_MANUAL;
 		error_state |= (1<<5);
 		esum2 = 0;
 	}	
-	if (labs(esum3) > 140000 && speed3 == 0) {
+	if (labs(esum3) > STALL_LIMIT && speed3 == 0) {
 		motor3 = 0;
 		motor3_mode = MOTOR_MANUAL;
 		error_state |= (1<<6);
 		esum3 = 0;
 	}	
-	if (labs(esum4) > 140000 && speed4 == 0) {
+	if (labs(esum4) > STALL_LIMIT && speed4 == 0) {
 		motor4 = 0;
 		motor4_mode = MOTOR_MANUAL;
 		error_state |= (1<<7);
@@ -1040,11 +1047,11 @@ int main(void) {
 
 	// I2C
 	TWAR = 0x50;
-	TWI_RESET;
+	TWI_ACK;
 
 	// Motor 1 & 2
-	// Also used for PWM frequency TIMER1_FREQ
-	// Timer 1: Fast PWM non-inverting mode, Top=255 => 15.625kHz
+	// Also used for PWM frequency TIMER1_FREQ (F_CPU/256)
+	// Timer 1: Fast PWM non-inverting mode, Top=255 => 19.531kHz
 	// Prescaler=1
 	//TCCR1A = (1 << COM1A1) | (1 << COM1B1) | (1 << WGM10);
 	// Avoid narrow spike on extreme pwm value 0 by not setting COM1*1
@@ -1081,10 +1088,11 @@ int main(void) {
 			case 0xff: // Magic reg that starts the bootloader
 				if (bootloader == 0xa5) {
 					cli();
-					{
-						void (*start)(void) = (void*)0x1800;
-						start();
-					}
+					// write mark to first area in eeprom
+					eeprom_write_byte((uint8_t*)0, 123);
+					eeprom_busy_wait();
+					// Use watchdog to restart
+					wdt_enable(WDTO_15MS);
 				}
 				break;
 		}
@@ -1125,7 +1133,7 @@ int main(void) {
 			motor4_mode = MOTOR_PID;
 		}
 
-		if (run_update >= 156) { // TIMER1_FREQ/156 = ~100Hz
+		if (run_update >= 195) { // TIMER1_FREQ/195 = ~100Hz
 			run_update=0;
 
 			update_pos();