scripts/wt_node.py

   1 #!/usr/bin/env python
   2 # -*- coding: iso-8859-15 -*-
   3
   4 import rospy
   5 import tf
   6 import struct
   7 import prctl
   8 import spidev
   9 from time import sleep
  10 from i2c import i2c, i2c_write_reg, i2c_read_reg
  11 from math import *
  12 from geometry_msgs.msg import Twist
  13 from nav_msgs.msg import Odometry
  14 from diagnostic_msgs.msg import DiagnosticArray, DiagnosticStatus, KeyValue
  15 from sensor_msgs.msg import Imu, Range
  16 from wild_thumper.msg import LedStripe
  17 from dynamic_reconfigure.server import Server
  18 from wild_thumper.cfg import WildThumperConfig
  19
  20 WHEEL_DIST = 0.248
  21
  22 class LPD8806:
  23         def __init__(self, bus, device, num_leds):
  24                 self.spi = spidev.SpiDev()
  25                 self.spi.open(bus, device)
  26                 self.spi.mode=0b00
  27                 self.spi.max_speed_hz=int(2e6)
  28                 self.num_leds = num_leds
  29                 self.latch()
  30                 self.l = [(0, 0, 0)] * num_leds
  31                 self.update()
  32
  33         def set(self, i, red=0, green=0, blue=0):
  34                 if red > 127 or green > 127 or blue >> 127 or red < 0 or green < 0 or blue < 0:
  35                         raise Exception("Bad RGB Value")
  36                 self.l[i] = (red, green, blue)
  37
  38         def latch(self):
  39                 self.spi.writebytes([0x0 for i in range((self.num_leds+31)/32)])
  40
  41         def update(self):
  42                 l = []
  43                 for i in range(self.num_leds):
  44                         red, green, blue = self.l[i]
  45                         l.append(0x80 | green)
  46                         l.append(0x80 | red)
  47                         l.append(0x80 | blue)
  48                 self.spi.writebytes(l)
  49                 self.latch()
  50
  51 class MoveBase:
  52         def __init__(self):
  53                 rospy.init_node('wild_thumper')
  54                 prctl.set_name("wild_thumper")
  55                 enable_odom_tf = rospy.get_param("~enable_odom_tf", True)
  56                 if enable_odom_tf:
  57                         self.tf_broadcaster = tf.broadcaster.TransformBroadcaster()
  58                 else:
  59                         self.tf_broadcaster = None
  60                 self.dyn_conf = Server(WildThumperConfig, self.execute_dyn_reconf)
  61                 self.pub_odom = rospy.Publisher("odom", Odometry, queue_size=16)
  62                 self.pub_diag = rospy.Publisher("diagnostics", DiagnosticArray, queue_size=16)
  63                 self.pub_range_fwd = rospy.Publisher("range_forward", Range, queue_size=16)
  64                 self.pub_range_bwd = rospy.Publisher("range_backward", Range, queue_size=16)
  65                 self.pub_range_left = rospy.Publisher("range_left", Range, queue_size=16)
  66                 self.pub_range_right = rospy.Publisher("range_right", Range, queue_size=16)
  67                 self.cmd_vel = None
  68                 self.bMotorManual = False
  69                 self.set_speed(0, 0)
  70                 rospy.loginfo("Init done")
  71                 i2c_write_reg(0x50, 0x90, struct.pack("BB", 1, 1)) # switch direction
  72                 self.pStripe = LPD8806(1, 0, 12)
  73                 rospy.Subscriber("cmd_vel_out", Twist, self.cmdVelReceived)
  74                 rospy.Subscriber("led_stripe", LedStripe, self.led_stripe_received)
  75                 rospy.Subscriber("imu", Imu, self.imuReceived)
  76                 self.run()
  77
  78         def run(self):
  79                 rate = rospy.Rate(20.0)
  80                 sleep(3) # wait 3s for ros to register and establish all subscriber connections before sending reset diag
  81                 reset_val = self.get_reset()
  82                 rospy.loginfo("Reset Status: 0x%x" % reset_val)
  83                 i = 0
  84                 while not rospy.is_shutdown():
  85                         rospy.logdebug("Loop alive")
  86                         #print struct.unpack(">B", i2c_read_reg(0x50, 0xA2, 1))[0] # count test
  87                         self.get_motor_err()
  88                         self.get_odom()
  89                         self.get_voltage()
  90                         if i % 2:
  91                                 self.get_dist_forward()
  92                                 self.get_dist_left()
  93                         else:
  94                                 self.get_dist_backward()
  95                                 self.get_dist_right()
  96                         i+=1
  97                         if self.cmd_vel != None:
  98                                 self.set_speed(self.cmd_vel[0], self.cmd_vel[1])
  99                                 self.cmd_vel = None
 100                         rate.sleep()
 101
 102         def execute_dyn_reconf(self, config, level):
 103                 self.bClipRangeSensor = config["range_sensor_clip"]
 104                 self.range_sensor_max = config["range_sensor_max"]
 105                 self.odom_covar_xy = config["odom_covar_xy"]
 106                 self.odom_covar_angle = config["odom_covar_angle"]
 107                 self.rollover_protect = config["rollover_protect"]
 108                 self.rollover_protect_limit = config["rollover_protect_limit"]
 109                 self.rollover_protect_pwm = config["rollover_protect_pwm"]
 110
 111                 return config
 112
 113         def imuReceived(self, msg):
 114                 if self.rollover_protect:
 115                         (roll, pitch, yaw) = tf.transformations.euler_from_quaternion(msg.orientation.__getstate__())
 116                         if pitch > self.rollover_protect_limit*pi/180:
 117                                 self.bMotorManual = True
 118                                 i2c_write_reg(0x50, 0x3, struct.pack(">h", self.rollover_protect_pwm))
 119                                 i2c_write_reg(0x50, 0x7, struct.pack(">h", self.rollover_protect_pwm))
 120                         elif pitch < -self.rollover_protect_limit*pi/180:
 121                                 self.bMotorManual = True
 122                                 i2c_write_reg(0x50, 0x1, struct.pack(">h", -self.rollover_protect_pwm))
 123                                 i2c_write_reg(0x50, 0x5, struct.pack(">h", -self.rollover_protect_pwm))
 124                         elif self.bMotorManual:
 125                                 i2c_write_reg(0x50, 0x1, struct.pack(">hhhh", 0, 0, 0, 0))
 126                                 self.bMotorManual = False
 127
 128         def get_reset(self):
 129                 reset = struct.unpack(">B", i2c_read_reg(0x50, 0xA0, 1))[0]
 130
 131                 msg = DiagnosticArray()
 132                 msg.header.stamp = rospy.Time.now()
 133                 stat = DiagnosticStatus()
 134                 stat.name = "Reset reason"
 135                 stat.level = DiagnosticStatus.ERROR if reset & 0x0c else DiagnosticStatus.OK
 136                 stat.message = "0x%02x" % reset
 137
 138                 wdrf = bool(reset & (1 << 3))
 139                 if wdrf: rospy.loginfo("Watchdog Reset")
 140                 borf = bool(reset & (1 << 2))
 141                 if borf: rospy.loginfo("Brown-out Reset Flag")
 142                 extrf = bool(reset & (1 << 1))
 143                 if extrf: rospy.loginfo("External Reset Flag")
 144                 porf = bool(reset & (1 << 0))
 145                 if porf: rospy.loginfo("Power-on Reset Flag")
 146                 stat.values.append(KeyValue("Watchdog Reset Flag", str(wdrf)))
 147                 stat.values.append(KeyValue("Brown-out Reset Flag", str(borf)))
 148                 stat.values.append(KeyValue("External Reset Flag", str(extrf)))
 149                 stat.values.append(KeyValue("Power-on Reset Flag", str(porf)))
 150
 151                 msg.status.append(stat)
 152                 self.pub_diag.publish(msg)
 153                 return reset
 154
 155
 156         def get_motor_err(self):
 157                 err = struct.unpack(">B", i2c_read_reg(0x50, 0xA1, 1))[0]
 158
 159                 msg = DiagnosticArray()
 160                 msg.header.stamp = rospy.Time.now()
 161                 stat = DiagnosticStatus()
 162                 stat.name = "Motor: Error Status"
 163                 stat.level = DiagnosticStatus.ERROR if err else DiagnosticStatus.OK
 164                 stat.message = "0x%02x" % err
 165
 166                 # Diag
 167                 stat.values.append(KeyValue("aft left diag", str(bool(err & (1 << 0)))))
 168                 stat.values.append(KeyValue("front left diag", str(bool(err & (1 << 1)))))
 169                 stat.values.append(KeyValue("aft right diag", str(bool(err & (1 << 2)))))
 170                 stat.values.append(KeyValue("front right diag", str(bool(err & (1 << 3)))))
 171                 # Stall
 172                 stat.values.append(KeyValue("aft left stall", str(bool(err & (1 << 4)))))
 173                 stat.values.append(KeyValue("front left stall", str(bool(err & (1 << 5)))))
 174                 stat.values.append(KeyValue("aft right stall", str(bool(err & (1 << 6)))))
 175                 stat.values.append(KeyValue("front right stall", str(bool(err & (1 << 7)))))
 176
 177                 msg.status.append(stat)
 178                 self.pub_diag.publish(msg)
 179
 180         def get_voltage(self):
 181                 volt = struct.unpack(">h", i2c_read_reg(0x52, 0x09, 2))[0]/100.0
 182
 183                 msg = DiagnosticArray()
 184                 msg.header.stamp = rospy.Time.now()
 185                 stat = DiagnosticStatus()
 186                 stat.name = "Voltage"
 187                 stat.level = DiagnosticStatus.ERROR if volt < 7 else DiagnosticStatus.OK
 188                 stat.message = "%.2fV" % volt
 189
 190                 msg.status.append(stat)
 191                 self.pub_diag.publish(msg)
 192
 193
 194         def get_odom(self):
 195                 speed_trans, speed_rot, posx, posy, angle = struct.unpack(">fffff", i2c_read_reg(0x50, 0x38, 20))
 196                 current_time = rospy.Time.now()
 197
 198                 # since all odometry is 6DOF we'll need a quaternion created from yaw
 199                 odom_quat = tf.transformations.quaternion_from_euler(0, 0, angle)
 200
 201                 # first, we'll publish the transform over tf
 202                 if self.tf_broadcaster is not None:
 203                         self.tf_broadcaster.sendTransform((posx, posy, 0.0), odom_quat, current_time, "base_footprint", "odom")
 204
 205                 # next, we'll publish the odometry message over ROS
 206                 odom = Odometry()
 207                 odom.header.stamp = current_time
 208                 odom.header.frame_id = "odom"
 209
 210                 # set the position
 211                 odom.pose.pose.position.x = posx
 212                 odom.pose.pose.position.y = posy
 213                 odom.pose.pose.position.z = 0.0
 214                 odom.pose.pose.orientation.x = odom_quat[0]
 215                 odom.pose.pose.orientation.y = odom_quat[1]
 216                 odom.pose.pose.orientation.z = odom_quat[2]
 217                 odom.pose.pose.orientation.w = odom_quat[3]
 218                 odom.pose.covariance[0] = self.odom_covar_xy # x
 219                 odom.pose.covariance[7] = self.odom_covar_xy # y
 220                 odom.pose.covariance[14] = 99999 # z
 221                 odom.pose.covariance[21] = 99999 # rotation about X axis
 222                 odom.pose.covariance[28] = 99999 # rotation about Y axis
 223                 odom.pose.covariance[35] = self.odom_covar_angle # rotation about Z axis
 224
 225                 # set the velocity
 226                 odom.child_frame_id = "base_footprint"
 227                 odom.twist.twist.linear.x = speed_trans
 228                 odom.twist.twist.linear.y = 0.0
 229                 odom.twist.twist.angular.z = speed_rot
 230                 odom.twist.covariance = odom.pose.covariance
 231
 232                 # publish the message
 233                 self.pub_odom.publish(odom)
 234
 235
 236         def set_speed(self, trans, rot):
 237                 i2c_write_reg(0x50, 0x50, struct.pack(">ff", trans, rot))
 238
 239         def cmdVelReceived(self, msg):
 240                 if not self.bMotorManual:
 241                         rospy.logdebug("Set new cmd_vel:", msg.linear.x, msg.angular.z)
 242                         self.cmd_vel = (msg.linear.x, msg.angular.z) # commit speed on next update cycle
 243                         rospy.logdebug("Set new cmd_vel done")
 244
 245         # http://rn-wissen.de/wiki/index.php/Sensorarten#Sharp_GP2D12
 246         def get_dist_ir(self, num):
 247                 dev = i2c(0x52)
 248                 s = struct.pack("B", num)
 249                 dev.write(s)
 250                 dev.close()
 251
 252                 sleep(2e-6)
 253
 254                 dev = i2c(0x52)
 255                 s = dev.read(2)
 256                 dev.close()
 257
 258                 val = struct.unpack(">H", s)[0]
 259                 return val
 260
 261         def start_dist_srf(self, num):
 262                 dev = i2c(0x52)
 263                 s = struct.pack("B", num)
 264                 dev.write(s)
 265                 dev.close()
 266
 267         def read_dist_srf(self, num):
 268                 return struct.unpack(">H", i2c_read_reg(0x52, num, 2))[0]/1000.0
 269
 270         def send_range(self, pub, frame_id, typ, dist, min_range, max_range, fov_deg):
 271                 if self.bClipRangeSensor and dist > max_range:
 272                         dist = max_range
 273                 msg = Range()
 274                 msg.header.stamp = rospy.Time.now()
 275                 msg.header.frame_id = frame_id
 276                 msg.radiation_type = typ
 277                 msg.field_of_view = fov_deg*pi/180
 278                 msg.min_range = min_range
 279                 msg.max_range = max_range
 280                 msg.range = dist
 281                 pub.publish(msg)
 282
 283         def get_dist_left(self):
 284                 if self.pub_range_left.get_num_connections() > 0:
 285                         dist = self.get_dist_ir(0x1)
 286                         if dist > -67:
 287                                 self.send_range(self.pub_range_left, "ir_left", Range.INFRARED, 30.553/(dist - -67.534), 0.04, 0.3, 1)
 288
 289         def get_dist_right(self):
 290                 if self.pub_range_right.get_num_connections() > 0:
 291                         dist = self.get_dist_ir(0x3)
 292                         if dist > 69:
 293                                 self.send_range(self.pub_range_right, "ir_right", Range.INFRARED, 17.4/(dist - 69), 0.04, 0.3, 1)
 294
 295         def get_dist_forward(self):
 296                 if self.pub_range_fwd.get_num_connections() > 0:
 297                         dist = self.read_dist_srf(0x15)
 298                         self.send_range(self.pub_range_fwd, "sonar_forward", Range.ULTRASOUND, dist, 0.04, self.range_sensor_max, 30)
 299                         self.start_dist_srf(0x5) # get next value
 300
 301         def get_dist_backward(self):
 302                 if self.pub_range_bwd.get_num_connections() > 0:
 303                         dist = self.read_dist_srf(0x17)
 304                         self.send_range(self.pub_range_bwd, "sonar_backward", Range.ULTRASOUND, dist, 0.04, self.range_sensor_max, 30)
 305                         self.start_dist_srf(0x7) # get next value
 306
 307         def led_stripe_received(self, msg):
 308                 for led in msg.leds:
 309                         self.pStripe.set(led.num, red=led.red, green=led.green, blue=led.blue)
 310                         self.pStripe.update()
 311
 312
 313 if __name__ == "__main__":
 314         MoveBase()